-
Haltech Fuel Injector Adapter - 14mm 1/2 to Full Length
This fuel injector adapter allows a 1/2 length (34 mm) injector with 14 mm top O-ring, to be installed as a full-sized (60 mm) injector, fitting a fuel rail with a 14 mm O-ring bore.Supplied with...$10.00 -
Haltech Fuel Injector Adapter - 14mm 3/4 to Full Length
This fuel injector adapter allows a 3/4 length (48 mm) injector with a 14 mm top O-ring, to be installed as a full-sized (60 mm) injector, fitting a fuel rail with a 14 mm O-ring bore.This 14mm top...$10.00 -
Haltech Fuel Injector Adapter - 14mm Base
This fuel injector adapter allows a 1/2 length (34 mm) injector with extended tip, 14mm top and bottom O-rings to be installed as a 3/4 length (48 mm) injector.$10.00 -
Haltech Fuel Injector Adapter - Nissan Base
This fuel injector adapter allows a 1/2 length (34 mm) injector with an extended tip, and 14 mm top and bottom O-rings, to be installed into a Nissan intake manifold using a Nissan base O-ring.$10.00 -
Haltech Fuel Level Sender Signal Conditioner
Fuel Level Sender Signal ConditionerProduct DetailsOutputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI).Includes: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.$95.00 -
Haltech GPS Speed Input Module
GPS Speed Input ModuleProduct DetailsOutputs: 0V to 12V Pulsed OutputSuits: Applications that require a digital speed signalIncludes: Includes: GPS Speed Input Module & GPS Antenna Matching male...$140.00 -
Haltech GT101 Style High Frequency Hall Effect Sensor
GT101 Style High Frequency Hall Effect SensorProduct DetailsSuits: Wheel Speed, Crank/Cam etc.Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)$95.00 -
Haltech Harness Sleeve Pack
Harness Sleeve PackProduct DetailsIncludes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x 0.12m Cable ties Small (100mm) x 20...$46.00 -
Haltech HC5 - Hydraulic Crimper
HC5 Hydraulic Crimper 5 TONProduct DetailsSuits: 00 AWG to 12AWG cable.Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit...$135.00 -
Haltech High Output CDI Coil
High Output CDI Coil - inc Plug & PinsProduct DetailsIncludes: Matching Delphi plug and pins.$88.00 -
Haltech High Output IGN-1A Inductive Coil with built-in ignition module
High Output IGN-1A Inductive Coil with built-in moduleProduct DetailsIncludes: Matching plug and pins. IGN1A$91.00 -
Haltech High Output Inductive Coil
High Output Inductive Coil suit HPI modulesProduct DetailsSuits: Haltech range of HPI High Power Igniters.Includes: Matching Delphi plug and pins.Notes: Must be used with an ignitor ignitor/module.$76.00