-
Haltech Bosch 980cc injectors - Flowmatched set of 4 (0280158040)
This flowmatched set of Bosch injectors consists of high-impedance, 980cc fuel injectors designed for high-performance engines. They deliver precise fuel flow, support E85, and feature a single-cone...$351.00 -
Haltech Bosch 980cc injectors - Flowmatched set of 6 (0280158040)
This flowmatched set of Bosch injectors consists of high-impedance, 980cc fuel injectors designed for high-performance engines. They deliver precise fuel flow, support E85, and feature a single-cone...$526.00 -
Haltech Bosch 980cc injectors - Flowmatched set of 8 (0280158040)
This flowmatched set of Bosch injectors consists of high-impedance, 980cc fuel injectors designed for high-performance engines. They deliver precise fuel flow, support E85, and feature a single-cone...$702.00 -
Haltech Bosch LSU 4.9 Sensor Wideband harness Only - Suits Nexus Series and Elite Pro Plugin ECU's 1.2m (4')
Bosch LSU 4.9 Sensor Wideband harness Only 1.2m (4'), Pre-terminated with pins to Suit Haltech ECU's / VCU's.Product DetailsSuits: Nexus Series Products with Onboard Wideband Elite PRO Plug-in ECUs...$51.00 -
Haltech Cable - Multicore - 2 x 22AWG (Black/White) - 10M (32')
Supplied in 10m (32') length. Used to wire 2 pin sensors such as air temperature sensors, coolant temperature sensors, etcConductors - 2 x 22AWG - (Black/White)Conductor Insulation - ETFECable Jacket...$21.00 -
Haltech Cable - Multicore - 3 x 22AWG (Orange/Black/White) - 10M (32')
Supplied in 10m (32') length. Used to wire 3 pin sensors such as linear position sensors, shock travel sensors, speed sensors, etcConductors - 3 x 22AWG - (Orange/Black/White)Conductor Insulation -...$28.00 -
Haltech Cable - Multicore - 4 x 20AWG (Red/Black/White/Blue) - 10M (32')
Supplied in 10m (32') length. Used to make Haltech CAN cables with custom extended lengths, e.g. ECU at the front and PD-16 at the rear of the car.Conductors - 4 x 20AWG -...$33.00 -
Haltech CAN Adaptor Cable DTM-4 Female Receptacle/Socket to 8 pin Black Tyco
Haltech CAN Adaptor Cable DTM-4 F to 8 pin Black Tyco 75mm (3")Product DetailsSuits: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system.$47.00 -
Haltech CAN Adaptor Loom - DT-4 to DTM-4
CAN Cable - DT to DTM Adaptor- Suits CAN KeypadProduct DetailsSuits: CAN Keypad 2 x 4 and 3 x 5Includes: 1 x HT-130045 - Adaptor HarnessNotes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad -...$28.00 -
Haltech CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU'sProduct DetailsSuits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force...$56.00 -
Haltech CAN Adaptor Loom DTM-4 to DTM-2 Suits Fueltech
Used to connect supported Haltech CAN devices to the DTM-2 CAN connector found on Fueltech FT550 Lite, FT550, FT600, FT700 and FT700 Plus ECUs or harness kits like the LS550 V8, PRO550 Gen II V8, and...$35.00 -
Haltech CAN Adaptor Loom DTM-4 to Flying Leads
CAN Adaptor Loom (DTM-4 to Flying leads ) - Suits AMP Superseal 1.0 series ConnectorProduct DetailsSuits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series...$28.00