Nobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015-2017 Mustang GT (RHD) oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.
Features and Benefits
- Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
- Pre-made stainless steel braided oil lines with durable -AN fittings
- Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
Product Details
- Generic Primary
- Generic Primary
- Generic Primary
- Generic Primary
- Generic Primary
Part Number: misMMOC-MUS8-15TBKRHD
Description: Mishimoto 15-17 Ford Mustang GT Right-Hand Drive Thermostatic Oil Cooler Kit - Black
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
TechSpec Rows: 12
TechSpec Core Construction: N/A
TechSpec Core Length (in): 18.5
TechSpec Core Height (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Engine Codes: 5.0 Coyote
TechSpec Chassis Codes: S-550
TechSpec Installation Notes: N/A
TechSpec Caution: This kit is for Right-Hand Drive Mustangs only----Requires the removal of the stock coolant based oil cooler----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
TechSpec Overall Height (in): N/A
TechSpec Overall Width (in): 10.5
TechSpec Inlet: -10AN
TechSpec Outlet: -10AN
TechSpec Includes: Application-Specific Mounting Bracket / Air Diversion Shield--Bar-and-Plate Oil Cooler--Right-Hand Drive Oil Cooler Block Off Plate--2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings--4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings--M22 Thermostatic Sandwich Plate--Application-Specific, M22 x 1.5 extended length center bolt--M20 x -10AN Straight Fittings--1/8-in NPT Plugs--Large O-ring--Lower Radiator Hose w/ worm gear clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty
TechSpec Applications: 2015-2017 Ford Mustang GT (Right Hand Drive vehicles only)
TechSpec Fluid Capacity (qts): N/A
TechSpec Note: N/A
SellingPoint01: Direct fit for the 2015-2017 Ford Mustang GT (RHD)
SellingPoint02: Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
SellingPoint03: Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
SellingPoint04: Pre-made stainless steel braided oil lines with durable -AN fittings
SellingPoint05: Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler
SellingPoint06: Removes the stock fluid-based oil cooler for less stress on the engine's cooling system
SellingPoint07: Billet aluminum thermostatic oil sandwich plate
SellingPoint08: Increases oil capacity by 1qt
SellingPoint09: Fits with most aftermarket supercharger kits
SellingPoint10: Mishimoto Lifetime Warranty
SellingPoint11: N/A
SellingPoint15: N/A
Install Difficulty: 4
OptionLabel: Black, Thermostatic
Prop 65 Y/N: Y
SellingPoint14: N/A
SellingPoint13: N/A
SellingPoint12: N/A
TechSpec Overall Length (in): 31.7
Base Height: 0
Color: Black
Core Color: Black
Core Height: 0
Core Row Quantity: 0
Core Thickness: 0
Core Type: Bar-and-Plate
Core Width: 18.5
Finish: Anodized
Fluid Capacity: 0
Grade Type: Performance
Inlet Fitting Gender: Male
Inlet Fitting Type: AN Flare
Inlet Outside Diameter: 0.625
Outlet Fitting Gender: Male
Outlet Fitting Type: AN Flare
Outlet Outside Diameter: 0.625
Width: 10.5
Fits: 2015-2017 Ford Mustang (see fitment details).
